|
|
The Satamatics 201
is an extremely compact, single unit, low data rate
satellite terminal, designed to operate over INMARSAT
satellites using the D+ protocol. With an integral GPS
receiver, the Sat201 provides low cost global satellite
communications (with the exception of the Poles),
requiring only 8-32V DC power to operate.
The Sat201 can be user configured with both Distress and
Ops Normal buttons and is fully supported by TracPlus.
It can transmit as often as every three minutes on the
Inmarsat D+ satellite network and can be remotely
reconfigured.
Rated to IP66, the Sat201 is ideal for maritime
environments and has also found favour with aviation
customers.
The Satamatics 201 has a bottom entry cable, and is best
suited for permanent, external installations.The SAT 201
offers direct interfaces to most application
environments without the need for additional external
circuitry, significantly reducing system integration
costs.
The SAT 201 is fully programmable to report based on the
on-board I/O or based on a prescheduled time.
If you do not need battery backup, solar panel power
inputs, 4-20mA inputs or analogue output drivers then
this is the solution for you.
When fitted with the optional MDT860 message head, the
functionality of the Sat201 is significantly increased.
The MDT860 provides:
- compact form factor
- high contrast screen
- multi function buttons
- ground to air text messaging
- air to ground pre-canned responses
- one-button distress messages
- point of interest registration
- operations normal notification
- on-station distance filtering
- AFF Service request/cancel (when available)
- terminal settings configuration
The MDT860 can be retrospectively fitted to an
existing Sat201 installation. |
